How Much Does an Oral Surgery Office Build-Out Cost?

by Sali

Nov 22, 2026

Almost every oral surgeon planning a new office asks the same first question: how much will it cost? It is a fair question, and the honest answer is a range. An oral surgery build-out costs more than a general dental office, and the final number depends on your market, your space and how many surgical suites you need.

This guide explains the typical cost ranges, what pushes an oral surgery build-out above a standard dental office, the costs that sit outside the construction budget, and how to keep the budget under control. The figures here are planning ranges, not quotes. Your architect and general contractor should confirm them against your actual space and local market.

What does an oral surgery office build-out cost per square foot?

Published guides for dental and specialty tenant build-outs commonly cite a range of about $150 to $350 per square foot, with ground-up construction often reaching $400 or more per square foot. Oral surgery tends to sit in the upper part of the tenant build-out range because of the medical gas, sedation, recovery and sterilization requirements described below.

Here is what that means in practice. A 3,500 square foot office at $200 to $350 per square foot comes to roughly $700,000 to $1,225,000. One published budgeting guide gives similar all-in examples for oral surgery: about $700,000 to $1,000,000 for a 3,000 square foot office with one or two surgical suites, and about $1,000,000 to $1,400,000 for a 4,500 square foot office with multiple suites and sedation.

Always ask what the number includes. Some per-square-foot figures cover construction only. Others also include equipment, technology, millwork and permits. Two quotes can look very different and still cover the same work.

Why oral surgery costs more than a general dental office

Most of the extra cost is behind the walls, not in the finishes. Medical gas, ventilation, power, shielding and sterilization make up a large share of the budget. Some budgeting guides put these systems together at 60 to 70 percent of a dental or surgical build-out. The main drivers are:

Cost driverWhy it mattersRough range from budgeting guides
Medical gas and vacuumOxygen, nitrous oxide, medical air and vacuum follow NFPA 99, the national code for medical and dental gas installations. Surgical use often adds standby power.About $8,000 to $30,000 for basic piped gas, plus about $10,000 to $40,000 for surgical-grade gas and emergency power
Surgical suitesLarger than a standard operatory, with plumbing, power and monitoringAbout $8,000 to $40,000 per room built and equipped, with surgical suites at the high end
SterilizationA dedicated room with plumbing, ventilation and a clear workflowAbout $20,000 to $60,000
ImagingLead shielding for the x-ray or CBCT room, plus the machineShielding about $10,000 to $40,000. CBCT unit about $60,000 to $200,000
HVACZoning, filtration and pressure control beyond a base office systemAbout $25,000 to $70,000 above a base system
ElectricalA typical surgical office needs 400 to 500 amps, and local code may require a backup generatorVaries widely by building

These ranges come from published budgeting guides and vary by market. Use them as a sanity check on your contractor's bid, not as a replacement for one.

Costs outside the construction budget

The construction bid is only part of the total. Plan for these as well:

  • Design, engineering, permits and plan review. Often called soft costs. One budgeting guide suggests adding 20 to 30 percent to the hard construction estimate to reach a realistic all-in figure.
  • Equipment and technology. Chairs, imaging, sterilizers and IT are frequently quoted separately from construction.
  • Contingency. Set aside 10 to 15 percent for change orders and the surprises found once walls are opened.
  • Lease-end restoration. Some leases require you to remove gas lines, shielding and special plumbing when you leave. One guide cites $50,000 to $150,000, so read this clause before you sign.
  • Carrying costs. Rent and other expenses during design, permitting and construction, before the office can see patients.

Lease, renovate or build from the ground up?

  • Lease and build out a space (tenant improvement). This is the most common route. Many landlords offer a tenant improvement allowance, and it varies widely. Negotiate it before you sign, and bring your design plans to the table so the landlord sees what you intend to build.
  • Renovate an existing practice or a second-generation medical space. Renovation usually costs less per square foot than a full build-out. If you need to keep seeing patients, plan for phased construction, which can stretch the schedule.
  • Build from the ground up. This has the highest cost per square foot and the longest timeline, but it gives you control over the site, parking and a private patient exit.

Six ways to keep the budget under control

  1. Test the space before you sign the lease. A feasibility study or test fit confirms the space can hold your layout, power, parking and ventilation. Bring your architect in before the lease is signed.
  2. Get detailed drawings before comparing bids. A per-square-foot estimate without detailed plans rarely buys what you have in mind.
  3. Ask what each bid includes. Confirm the mechanical, electrical, plumbing and gas scope behind every number so bids can be compared fairly.
  4. Design for growth, equip for today. Plan for your ten-year needs, then equip only what you need at opening. AAOMS Today describes a practice designed with six operatories that opened with equipment in three or four of them.
  5. Negotiate lease terms with your attorney. Review the tenant improvement allowance and the restoration clause before signing.
  6. Choose a team that knows oral surgery. Missed code items such as medical gas, sedation requirements and accreditation standards lead to redesign and change orders.

Frequently asked questions

How much does it cost to build out an oral surgery office?

Planning ranges of roughly $200 to $350 per square foot are realistic for a tenant build-out in many markets, with oral surgery tending toward the upper part of that range. One published guide puts all-in budgets for 3,000 to 4,500 square foot oral surgery offices at about $700,000 to $1,400,000. Your market, space and number of surgical suites can move that number significantly.

Does the cost per square foot include equipment?

It depends on who gives the number. Some figures cover construction only, and others include equipment, technology and permits. Always ask.

Is it cheaper to renovate than to build out a new space?

Renovation often costs less per square foot, but the condition of the space and the need to keep operating during construction both affect the final cost.

When should I involve an architect?

Before you sign a lease. An architect can test whether a space works for your practice and flag code or utility problems that would add cost later.

How long does the process take?

For a leased space, many practice consultants plan roughly seven to ten months once the pre-design steps are finished. See our guide to the oral surgery office timeline for a phase-by-phase breakdown.

Plan your oral surgery office with DSArch

DSArch is an architecture and interior design firm that has focused on oral surgery offices for more than 10 years. You work directly with the founder from first sketch to final walkthrough. If you are comparing sites or budgets, book a call at calendly.com/sali-dsarch or email info@dsarch.org.